airflo (battery version)
6
ME0082 issue 1
7
A
A
B
C
D
E
B
8
‘Auto’ Control Button - fig.
7
The ‘Auto’ function is designed for use with the
range of Mangar International pneumatic hand
controls:-
Lever Hand Control - fig.
9
CAMEL Hand Control - fig.
10
ELK Hand Control - fig.
10
To switch on, press and hold the ‘Auto’ button until
the light (
A
) comes on. The light will stay on while
the ‘Auto’ function is selected.
Pressing any of the built-in control buttons will
cancel the ‘Auto’ function.
When in ‘Auto’ mode, the internal microprocessor
carries out a battery voltage check each time air
is required and if the voltage becomes too low, the
‘Auto’ function will be cancelled automatically.
Locking the built-in buttons - fig.
7
If desired, the built-in buttons can be locked to
prevent them from working.
Hold the battery indicator button (
B
) and then
the ‘deflate’ button (
C
).
With buttons (
B)
and (
C)
held, press the
following buttons in sequence: ‘Auto’ (
D
), ‘Up’
(
E
), ‘Auto’ (
D
), ‘Up’ (
E
) -
All within 3 seconds.
Confirmation that the buttons are locked will be
indicated by a double flash of all the lights.
To unlock the built-in buttons, repeat the locking
procedure.
Separate Push-Button Hand Control
-
fig.
8
Connect the hand control (
A
) to the socket (
B
).
Press the ‘Up’
button to raise.
Press the ‘Down’
button to lower.
•
•
•
•
•
•
•