Simple solutions for everyday independence
Airflo Plus
7
Compressor does not run when the 4 way
hand control buttons are pressed.
Ensure that the Airflo Plus has been switched
on.
Compressor causes electrical interference
with another piece of electrical equipment.
Move either the compressor or other item
further away from each other until the
interference stops.
Compressor keeps stopping when trying to
inflate the lifting aid.
Check that there are no kinks in the air hose.
Specifications
Airflo Plus
Weight:
5.7Kg (12½ lbs)
Output pressure:
0.35 bar (5 psi)
Batteries:
2 x 12v - 2.3Ah (Maintenance free Valve Regulated Sealed Lead Acid)
Battery Life:
Approx 1000 charging cycles (2 - 5yrs Depending on usage)
Lifting performance (
from full battery
):
ELK - 3 lifts
Camel - 1 lift (minimum)
Environmental protection: IP51 (Protection against large dust deposits & vertical falling drops of water)
Type BF equipment
This equipment has been tested and meets the requirements of current EMC legislation
Charger:
Model number
- CA0431
Input:
AC 100v - 240v, 50-60Hz, 0.3A
Output:
DC 30v, 0.45A
Double insulated Class II equipment
Check that there are no kinks in the air hose.
This happens when the compressor’s internal
temperature cut-out has tripped. Leave the
Airflo
Plus for 60-90 minutes to cool.
Battery State Indicator light flashing ‘Red’.
This happens when the current overload cut-
out has tripped. Leave for 3 seconds to self
reset.
Battery State Indicator light flashing ‘Red/
Green’.
English
Trouble shooting guide
