Manfrotto MVG220, Instructions Manual

Page: 8 / 60

GB
4.3 Balance Pan Axis (2) a. Place the camera lens forwards, check the gravity center of camera.
b. Unlock the quick release plate safety lock ① , adjust camera position until it can stay
stable at any angles.
c. Lock the safety lock
①
. Tilt the camera up or down, if it stays stable, it means
balanced.
4.2 Balance Roll Axis
a. Tighten the tilt axis position lock
①
, unlock the roll axis position lock
②
, check
gravity center of camera.
b. Loosen the cross arm lock screw
③
, slide cross arm
④
to balance the camera
position.
c. Tighten the cross arm lock screw ③ , and tilt the camera to the left or right, if it stays
stable, it means balanced.
a. Tighten the roll axis position lock ① after balanced tilt axis and roll axis. Unlock pan
axis position lock
②
, loosen vertical arm lock screw
③
.
b. Hold the handle angled to 15°~ 20°, check the camera's movement (roll axis will
point down if not balanced).
c. Slide vertical arm ④ to balance it until the camera stays there at any angles, balance
succeeded.
d. Tighten the vertical arm lock screw
③
.
⚠
Be sure to unlock the position lock before using
the gimbal.
5
Power ON/OFF
Long press power button, release the button until it
shows
on display.
Detailed Manual
Download the detailed user manual from official website manfrotto.com
8