V.033007
Sprint
®
2000
5.2 Control
Panel
Number
Name
Function
1
START DRYER
ON Button
The green
START DRYER ON
button is used to turn on the dryer and activate
the main blower, the exhaust blower, and the Conveyor Belt.
The button lights up when pressed, confirming that electrical power is on.
2
START DRYER
OFF Button
The red
START DRYER OFF
button turns off electrical power to the control
system. The button lights up when pressed, confirming that electrical power has
been disconnected and the shutdown process has begun.
The exhaust blowers and Conveyor Belt drive continue to run until the interior of
the heat chamber reaches 150 F (66 C). At that point the blowers and belt drive
shut down and the red
START DRYER OFF
button light goes out.
3
Digital
Temperature
Controller
The
Digital
Temperature Controller
includes buttons to input the Set Value
(SV)
temperature, and two LED indicators.
The function of the buttons is explained below in
Setting the Temperature
.
The red indicator on top is the Present Value
(PV)
indicator. It displays the
temperature in the heat chamber.
The green indicator below displays the Set Value
(SV)
entered by the operator.
4
BURNER
OPERATION
PURGE Light
The
BURNER OPERATION PURGE
light remains on during the 60-second
purge cycle portion of the ignition sequence, and turns off when the purge
operation is complete.
5
BURNER
OPERATION
MAIN Light
The green
BURNER
OPERATION MAIN
light turns on when the Burner
Operation Purge light turns off, and remains on as long as the burner is
operating.
6
BURNER
OPERATION
MAIN ON Button
The green
BURNER
OPERATION MAIN ON
button starts the gas burner
ignition sequence. When pressed, the button lights to confirm that the ignition
sequence—including the 60-second
Automatic Purge Cycle
—has begun.
M&R Companies 1N 372 Main St. Glen Ellyn, IL 60137 USA
19
Tel: +630-858-6101 Fax: +630-858-6134
www.mrprint.com
