M&R Companies 1N 372 Main St. Glen Ellyn, IL 60137 USA
15
Tel: +630-858-6101 Fax: +630-858-6134
V.062414
4.2.1 Install Photoelectric Sensor
Place the
Press PLC/ Foot Pedal/Flash Sensor
switch down in the
Flash Sensor
position (1).
The Photoelectric Sensor (1) on your unit is designed to activate the Quartz Heating Elements by sensing the
leading edge of the pallets as they are indexed around the press. The Photoelectric Sensor is installed at the
factory on the right side of the unit for use on presses set up for clockwise rotation.
For presses set up for counterclockwise rotation, the Photoelectric Sensor should be installed on the left side of
the unit.
Remove the 2 screws and nut (2) that hold the Photoelectric Sensor to the Mounting Bracket and the screw that
holds the Cable Fastener (3).
Remove the 2 screws that hold the bracket (4). Reinstall the Cable Fastener, Bracket and Sensor on the left side
of the unit using the mounting holes provided.
Summary of Contents for Red Chili 1418
Page 1: ...Red Chili Nv3 Part MAN REDCHILI 95 00 USD V 062414...
Page 2: ......
