Cayenne
™
Series
V.121806
5.2
Digital Control Unit
The M&R flash cure uses an alpha/numeric digital controller to control flash time, quartz heating
element section use and power output.
Note: On a Z-Series press, communication protocol allows users to control flash operation from the main control
panel. After entering or changing a value on the flash cure, press the
ENT
key to communicate the value
to the PLC.
Power
Ensure power is supplied to the equipment. The control
displays the flash cure model on the top line and
FLASH
on
the lower line.
Reset and
PV/SV
Place the
POWER
switch to
ON
. The control displays
PRESS
on the top line and
RESET
on the lower line. Press
RESET
on the control panel; the current Process
Temperature Value (PV) and Set Temperature Value (SV)
now display.
20
M&R Companies 1N 372 Main St. Glen Ellyn, IL 60137 USA
Tel: +630-858-6101 Fax: +630-858-6134
www.mrprint.com
