Bluetooth device pairing shall be required to activate the Bluetooth transmission mode
if the audio device to be connected has any one of the following characteristics:
Bluetooth connecting in need of Bluetooth pairing
a) a new device to this product;
b) a device removing this product from its paired device list;
c) a device not the one which most recently paired with this product.
Step a) Two different options to initiate the device pairing procedure:
#1 option) Pressing on the power button for less than 5 seconds then releasing the button.
Starting with four series of beep sounds and another two series of beep sounds next, this
product is powered on and sends out connecting requests to an audio device it paired to
most recently. However, because the audio device to be connected does not satisfy either one
of the aforementioned requirements about connecting without pairing, this product shall
automatically initiate a device pairing procedure.
#2 option) The users press on the power button for more than 5 seconds before releasing it.
In this situation, this product immediately starts a device pairing procedure. The users shall also
notice four series of beep sounds and another two series of beep sounds next to it.
During this product’s device pairing procedure, in the audio device’s Bluetooth device
manager system, check available Bluetooth devices. This product’s pairing name
1
“MOOH-BE00BT” shall be added into the list of those available devices to be connected in the
audio device Bluetooth device manager system as a response to this product’s pairing request.
Note 1) If this product is not added in the list, it may be in a priority order paired with another Bluetooth audio
device that it connected before. In this case, the users shall either release this product from another audio
device’s connecting device list, or bring this product out of the Bluetooth signal range (> 50 feet in-sight distance)
of another audio device, then turn off and on this product and repeat the device pairing procedure. Another kind of
cause may be related to the audio device, which shall be solved by restarting the audio device or refresh its
Bluetooth device manager system.
In the audio device’s Bluetooth device manager system, the users shall select this
product as “my device” or “the paired device” of the Bluetooth audio device, after which this
product is Bluetooth connected with the audio device and the Bluetooth transmission mode is
activated. The users shall notice two series of beep sounds and the status indication lights
flashes blue twice every five seconds to indicate a connected Bluetooth transmission.
A typical Bluetooth connecting in this situation is introduced in the following steps:
The device pairing procedure is identified by a visual signal that the status indication
light alternatively flashes blue and red.
Step b) Finding this product in the audio device’s Bluetooth available devices list:
Step c) Selecting this product as the audio device’s Bluetooth connected devices:
page 8
