16
G20
G25
+ loosen
1
G25
G20
- tighten
0
G20
G30/G31
- tighten
3,5
G30/G31
G20
+ loosen
5
The pre-setting is only to prepare a new fuel blend that can easily be ignited.
After setting the richness of the mixture, check the heater function, especially the cold starts.
1. When purchasing a new device, the supplier will take back the old heater and ensure its disposal.
2. Hand over the old heater to the manufacturer for disposal.
3. Disassemble the heater and give it away as scrap.
●
Fans, Venturi tubes, gas valve and heater wiring are electrical waste
●
The heater shell is a lightweight 27 grade steel waste
●
The exchanger, burner and burner extension are alloyed steel waste, class 025
Control automatic
Communication cable connector
Gas valve
Place for checking the connected
overpressure (loosen the screw,
put on the manometer hose)
Venturi tube
Mixture adjustment screw
Summary of Contents for MONZUN 15 Series
Page 1: ......
