Mandik FDMQ 120, Installation, Operation, Maintenance And Service Manual

Page: 32 / 52

FDMQ 120 - Fire damper Page 32 Version 2022-12-20
TPM 166/22
Gypsum wall construction - Ablative Coated Batt
EIS 120
X
5
0
..
.2
0
0
X
≥ 100
1 FDMQ 120
2 Gypsum wall construction
3 Ablative Coated Batt (e.g. Firestop Board HILTI CFS-CT B 1S 140/50 - min. density 140 kg/m
3
+ Firestop acrylic
sealant HILTI CFS-S ACR or equivalent)
4 Fire stop coating thickness 1 mm (e.g. HILTI CFS-CT, PROMASTOP-CC or equivalent)
5 Duct
6 Protective cladding boards - (not part of the damper) but must be used as part of the penetration filling. It can be
ordered from MANDÍK as an accessory (e.g. PROMATECT-MST th. 30 mm - min. density 750 kg/m
3 or equivalent)
7 Fire resistant mastic - fill the gap on both sides of the fire separation construction and around the perimeter of
penetration and damper body. (e.g. HILTI CFS-S ACR)
8 Fixing profile with threaded rod → see pages 38 to 40
B
m
in
.
B
+
1
0
0
m
a
x
.
B
+
4
0
0
A
min. A+100
max. A+400
5
0
..
.2
0
0
≥ 100
≥
2
0
■
For connection following duct → see page 40