M&C LA Series, Instruction Manual

Page: 5 / 29

www.mc-techgroup.com LA | 1.01.01 5
3 SAFETY INSTRUCTIONS
Follow these safety directions and instructions regarding installation, commissioning and
operation of this equipment:
Read this manual before commissioning and operating the product. Make sure to follow all safety
instructions.
Installation and commissioning of electrical devices must be carried out only by qualified skilled
personnel in compliance with the current regulations.
The installation and commissioning of the device must conform to the requirements of VDE 0100 (IEC
364) ‘Regulations on the Installation of Power Circuits with Nominal Voltages below 1000 V’ and must
be in compliance with all relevant regulations and standards.
Check the details on the type plate to ensure that the equipment is connected to the correct mains
voltage.
Protection against damages caused by high voltages:
Disconnect the power supply before opening the device for access. Make sure that all extern power
supplies are disconnected.
The device is only to be used within the permitted range of temperatures and pressures.
Operate the device only in the permitted temperature and pressure ranges. For details please refer to
the technical data sheet or manual.
Install the device only in protected areas, sheltered from sun, rain and moisture. The product should not
be exposure to the elements.
The electronic controllers LA1.1 and LA1.4 as well as the liquid sensors LA1S and LA25S in combination
with these electronic controllers are not allowed to be used in hazardous areas.
Installation, maintenance, inspections and any repairs of the devices must be carried out only by
qualified skilled personnel in compliance with the current regulations.
4 WARRANTY
In case of a device failure, please contact immediately M&C or your M&C authorized distributor.
We have a warranty period of 12 months from the delivery date. The warranty covers only
appropriately used products and does not cover the consumable parts. Please find the complete
warranty conditions in our terms and conditions.
The warranty includes a free-of-charge repair in our production facility or the free replacement of the
device. If you return a device to M&C, please be sure that it is properly packaged and shipped with
protective packaging. The repaired or replaced device will be shipped free of delivery charges to the
point of use.