Faults
57
Carefully read the Operating Instructions before starting any work!
This is especially valid for the chapter on General Safety Instructions
and the safety instructions in each of the chapters.
9
Faults
The following chapter describes the possible faults which can occur and the work to correct them.
For those faults that cannot be rectified by the following information, contact the manufacturer of the entire
system or MAN Service.
9.1
Prerequisite
Before starting any work read and observe the General Safety Instructions and the safety information in this
chapter.
Strictly observe these instructions and act prudently to avoid accidents, personal injury and property damage.
9.2
Safety Instructions
Personnel
S
Engine faults may only be rectified by specially trained qualified personnel or by the manufacturer of the
entire system.
Personal Protective Equipment
The following protective equipment must be worn:
S
Protective Clothing
S
Safety Shoes
S
Safety Gloves
Ground Rules
WARNING!
Risk of injury caused by improper rectification of faults!
Improper rectification of faults can case serious injuries or considerable property damage.
For this reason:
S
Ensure that the engine cannot be started be unauthorised persons.
S
Ensure adequate work space before starting any work.
S
Make sure work space is kept clean and orderly! Any unused parts or components lying
around are potential sources of accidents.
