SPECIFICATION
CHARGING THE BATTERY
Note: Before first using your cordless drill, please charge the battery. First plug the
charger plug into a suitable mains socket(240V~), and the indicator light of charger
will show green, then insert the battery pack into the charger base, the indicator light
will become red to indicate that charging is taking place.
After charging about 1 hour, the battery will be fully charged. When fully charged,
the light will turn red to green, unplug the charger plug from the wall socket, the tool
is ready to use.
Warning
When battery pack runs out after continuously use or exposure to direct sunlight or
heat, allow time for the battery to cool down before recharging to achieve the full
charge.
OPERATION INSTRUCTIONS
1. On/off switch
Depress to start and release to stop your drill. The on/off switch is fitted with a
brake function which stops your chuck immediately when you quickly release the
switch.
It is also a variable speed switch that delivers higher speed and torque with
increased trigger pressure. Speed is controlled by the amount of switch trigger
depression
2. Switch lock
The switch trigger can be locked in the OFF position . This helps to reduce the
possibility of accidental starting when not in use .
To lock the switch trigger, place the direction of rotation selector in the center
position.
3. Reversible
For drilling and screw driving use forward rotation (lever is moved to the left), use
Reverse to remove screws or release a jammed drill bit.
Warning: Never change the direction of rotation when the chuck is rotating. Wait
until it is stopped.
2
.
0
A
h
0-360 /
0-1.350min
-1
18+1
1
hour
EN
9
12V Li-ion Cordless Drill
Voltage
12
V
Battery Type
Lithium-ion
Battery Capacity
No load speed
Number of clutch positions
Charging time
Summary of Contents for M.DC.T.ID.12.S
Page 13: ......
