• Hold the machine by the insulated gripping surfaces where the accessory may
contact hidden wiring or the mains cable. If the accessory contacts a ‘live’ wire,
the exposed metal parts of the machine can also become ‘live’. Risk of electric
shock.
• Do not use the machine while carrying it at your side. Risk of personal injury.
• Do not use the machine near flammable materials. Risk of fire.
• Beware that the accessory continues to rotate for a short period after switching off
the machine. Do not attempt to bring the accessory to a standstill yourself.
• Never put the machine down on a table or a workbench before it has been
switched off.
• Regularly clean the ventilation slots. Risk of electric shock.
Electrical safety
Always check that the voltage of the power supply corresponds to the voltage on
the rating plate.
• Do not use the machine if the mains cable or the mains plug is damaged.
• Only use extension cables that are suitable for the power rating of the machine
with minimum thickness of 1.5mm³. if you use an extension cable reel, always fully
unroll the cable.
TECHNICAL DATA
NOISE AND VIBRATION
Sound pressure (L
pa
) dB(A) 86
Acoustic power (L
wa
) dB(A) 97
Uncertainty (K) dB(A) 3
Vibration (sawing in steel) M/S2 7.38
Uncertainty (K) M/S2 1.5
Wear hearing protection.
Vibration level
The vibration emission level stated in this instruction manual has been measured in
accordance with a standardized test given in EN 60745; it may be used to compare
one tool with another and as a preliminary assessment of exposure to vibration
when using the tool for the applications mentioned
- Using the tool for different applications, or with different or poorly maintained
accessories, may significantly increase the exposure level
- The times when the tool is switched off or when it is running but not actually doing
the job, may significantly the exposure level.
EN
9
Mains voltage
Mains frequency
Power input
No-load speed
Weight
220-240 V~
50Hz
300W
0-23000 min
-1
1.6 kg
