Mamiya 645DF, Instructions Manual

Page: 50 / 53

95 96
When Any of These Displays Appear
The camera caution mark will blink if the camera body detects an abnormality.
* If the camera cannot focus in the AF Ò
S
Ó (Single) mode, you cannot release the shutter.
* When an M645 lens is installed and the aperture is less than f/5.6, this indicator appears.
* This indicator appears when the battery capacity is low.
* The shutter will not operated when the digital back is not installed onto the camera body. If you try
to press the shutter, this indicator appears.
* This symbol appears when setting the custom functions but you have not selected user A, B, or C.
* While in manual exposure mode, and when the difference between the set value and metered
value exceeds 6EV, this indicator will appear.
* This will appear when a lens is not installed.
* When an M645 lens is installed.
When ÒErrÓ appears, some abnormality has been detected in the course of taking photos.
- Try to adjust focus again, or change to the focus lock mode or manual focus mode.
- Make the lens aperture faster than f/5.6.
- Replace with new batteries.
- Install the digital back onto the camera body.
- Select a user before changing the custom function settings.
- Change aperture or shutter speed.
- Install a lens on the camera body.
- Replace with new batteries and press the shutter release button. If the Ò
End
Ó indicator still does not disappear, then
contact our sales office or service center.
LCD display
Main
LCD
panel
Viewfinder
LCD read-
outs
Magazine
LCD Problems
Causes and remedies
Remedies
Ref.
page
28
38
14
25
81
49,55,58
91
100