89
90
Types of Custom Functions
C-05: Select a way of setting aperture after changing lenses.
C-06: Select an amount of time until the camera enters sleep mode.
Select an amount of time to keep displaying the exposure meter status in the
LCDs after the last time the shutter release button was pressed halfway down: 5,
10, 15, 20, 25, 30, 40, 50, 60 seconds, or infinite (always on).
* The default is 15 seconds. If you select infinite (always on), you have to pay
attention to the drain on the batteries.
C-07: Select the range of exposure compensation.
Select
±
3 EV or
±
5EV.
C-08: Select the method for turning on & off the backlight on the main LCD display.
C-09: Select the time to cancel the mirror up status automatically.
Select 30 or 60, seconds, or on (no auto cancel).
After replacing the lens,
the aperture is always
set to the open.
After replacing the lens,
the aperture is always
set to the minimum.
The aperture is set to
the same.
The camera stores the
number of steps from
the open.
Turn the backlight on
using the backlight button
(goes off automatically
after approximately 10
seconds)
Turn on when the release
button is pressed halfway down.
Always lit when metered value
is indicated on the LCD. (Linked
to the C-06 power hold time.)
C-10: Specify the order for taking pictures in an auto bracket shot.
C-11: Select how to cancel auto bracketing.
C-12: Select the bracket shot operation method to use in the manual mode.
Choose whether or not to change shutter speed or aperture level in bracket
shots made in M mode.
C-13: Swap the function of the front and rear dials in M mode.
C-14: Enable operation of a sub-dial in Tv and Av modes.
Select whether or not to assign the same function as the front dial to the rear
dial when it is not assigned any other function. Even if you have assigned the
rear dial, it will still control exposure compensation in the electronic dial
exposure compensation setting.
C-15: Set the direction for increasing or decreasing numbers by turning the dials.
Normal, under, and over
(N-U-O)
Normal, over, and
under (N-O-U)
Under, normal, and
over (U-N-O)
Over, normal, and
under (O-N-U)
Release after each auto
bracket sequence.
Front: Aperture level
Rear: Shutter speed
On: Same function as the front dial
OF (OFF): No function
Left turn: Increase
Right turn: Decrease
Cancel by turning off the
camera power.
Cancel manually.
Make bracket shots by
changing the shutter
speed.
Make bracket shots by
changing the aperture
value.
Front: Shutter speed
Rear: Aperture level
Left turn: Decrease
Right turn: Increase