91
92
Types of Custom Functions
C-16: Select a way for the program shift.
* The rear dial has the same function as the front dial. When electronic dial exposure compensation is selected, the rear dial is
dedicated to control of the exposure compensation.
C-17: Swap the functions of the AEL and AFL buttons.
C-18: Specify the AE and AF lock operation when the shutter release button is pressed
halfway down.
D-19: Select the AE lock method when operating the AE lock button.
C-20: Method for displaying the AF focus mark in the viewfinder.
Shift along the program
line
Shift by putting priority
on the aperture value
Shift by putting priority
on the shutter speed
Follows the setting of C-13. In the drawing,
the front dial is assigned the shutter speed
priority shifts, the rear dial is assigned the
aperture priority shifts. Exposure
compensation with the electronic dial is not
available.
When program shift is
not selected, exposure
correction can be made
using the electronic dial.
Front: Lock AF
Rear: Lock AE
Front: Lock AE
Rear: Lock AF
Lock AF
Lock AE
Lock both AF and AE
No lock function
Hold the AE lock after
releasing the button.
* Release it by pressing
of the AE lock button
again.
Cancel the AE lock after
shutter release.
Only locked during the
AE lock button is
pressed down.
Display only the focus
mark
Don't display the mark
Display ON.
Display the defocus mark
in the manual focus
mode.
C-21: Select whether or not to display the exposure meter difference in the M mode.
C-22: Select whether the shutter speed or aperture value is shifted using the one-push
shift function to the metered value in the M mode.
C-23: Select the maximum exposure time in a bulb shot: 1, 2, 4, 8, 15, 30, or 60 minutes
or infinite (OF). The default time is set to 60 minutes. When infinite (OF) is
selected, pay attention to the drain on the batteries.
If the shutter is not closed in a bulb shot, the camera will force the shutter to close after the specified time.
This function also can be used as a long exposure timer in a bulb shot.
C-24: Select the bulb exposure operation method.
C-25: Select shutter speed for the X mode
Displayed
Not displayed
Shift the shutter speed
Shift the aperture level
Do not use this function
Expose while pressing
down the shutter release
button (bulb mode)
Press the shutter release
button to open the shutter
and press again to close.
Default (1/125)
1/80 seconds (when 0.3
is selected in C-01)
1/60 seconds
1/40 seconds (when
0.3 is selected in C-
01)
1/90 seconds (when 0.5
is selected in C-01)
1/60 seconds
1/45 seconds (when
0.5 is selected in C-
01)
