7
FITTING THE HOOD
1. Align the clips on the sides of the
hood with the holes in the pushchair’s
frame. Push the clips over the frames
and them slide the studs on the inside
of the clips into the holes.
Push the clips in the middle of the
two sections of the hood over the
middle section of the frame.
2. Pull the back of the hood down
over the pushchair’s backrest.
Push the three tensioning brackets
into the down position.
Slot the elastic loops on the sides of
the hood over the pins on the end of
the hood brackets.
Attach the velcro pads on the hood to
the pads on the pushchair’s backrest.
REMOVING THE HOOD
1. Push the three tensioning brackets
upwards and release the velcro pads
and elastic loops.
Pull the clips on the hood sides and
middle off the pushchair’s frame.
Summary of Contents for tempo twin
Page 1: ...TTPC_0029_0911_V2 Mamas Papas Holdings Ltd 2011 tempo twin...
Page 13: ...13...
Page 14: ...14...
Page 15: ...15...