Mamas & Papas pliko pramette four, Instructions For Use Manual

Page: 15 / 20

- 15 -
moving.
SWIVEL WHEELS: to swivel the front wheels lower
the levers as shown in arrow 1 (Fig.b).
WHEELS IN STATIONARY POSITION: To make them
stationary, push the lever in the opposite direction,
as indicated by arrow 2.
5• HOOD: to mount the hood, fasten the attachments
which are situated on the sides of the hood onto
those on the chassis, pushing outwards until the
hood clicks into place (Fig.a); fasten it onto the
inside of the armrest (Fig.b),
6 •and onto the backrest of the stroller (Fig.c). The
hood has a window enabling you to observe your
child, a large and practical pocket (Fig.d) and a
cord which games can be hung on (Fig.e).
To remove the hood: unhook the hood’s side
attachments from the chassis by pulling inwards,
unbutton it from the inside of the armrest and
from the backrest of the stroller.
7 •You can detach the back part of the fabric by
unzipping it and use the hood also as a sun canopy
(Fig.a). To reattach the back part of the fabric, close
the zipper (Fig.b).
8 •By lowering the stroller backrest, the rear hood
extends and through the double zipper a window
can be created to allow more air to circulate and
watch the child when sleeping.
9 Locking the harness:Remove the yoke from the
harness tidy, see above.
Lock the harness by pushing the tongues on the
ends of the waist straps into the buckle on the
crotch strap (I). The harness will automatical lock
when the tongues have been fully pushed in.
10•Unlocking the harness Squeeze the ends of the
tongues together (2) and then slide them out of the
buckle (3). Your child can now be removed from
the pushchair.
IMPORTANT: Every time you place your child in
the pushchair or when you position of the backest
always check that the harness is correctly fitted
and the shoulder and waist strap buckles are
correctly adjusted and a snug fit around your child.
Warning: Always use the crotch strap in
conjunction with the waist belt.
11•ADJUSTING THE FOOTREST: the footrest can be
adjusted to 2 positions. To lower the footrest, pull
the two side levers downwards while lowering the
footrest. To lift the footrest, pull it upwards until it
clicks into place.
12•ADJUSTING THE BACKREST: the backrest reclines
to 3 different positions. To lower the backrest, lift
the handle while lowering the backrest, locking it
in the desired position. To raise it, pull the backrest
upwards.
13•FRONT BAR: to fasten the front bar, slip both ends
of the front bar into the armrests until it clicks into
place.
14•The front bar can be opened to one side only to
allow the child to get in and out of the stroller easier
when he or she is older. To open the front bar, press
the button under the armrest while pulling out the
front bar (Fig.a). To remove the front bar, press the
two buttons under the armrests while pulling out the
front bar (Fig.b).
15•When removing the front bumper, insert the plugs
provided to close the armrests of the chassis.
16•FOLDING UP: before folding up Pliko Four, remove
the Navetta XL or the PrimoViaggio car seat. The
stroller can be folded up using one hand only: pull first
one lever upwards and then the other, until they click.
17•Hold the central handlebar and pull it upwards
until the stroller folds up (fig_a). Check the correct
closure of the chassis from the safety hook. When
folded, the chassis will stand upright (fig_b).
18•CARRYING: Pliko Four can be conveniently carried
by the central handle (with the front wheels set on
stationary) (fig.a). It can also be carried by the side
handle (fig_b).
19•REMOVABLE LINING: To remove the lining from
the stroller: unhook the sack attachments from the
armrests in the order indicated (fig_a); unfasten
the sack button at the sides; remove the sack from
the footrest; slide the leg divider part of the strap
from under the seat (fig_b);
20•unfasten the sack buttons from the seat; unscrew
the strap (only on one side),by keeping your finger
under the nut; slide it downwards
21•PRAMETTE MODE: The pushchair can be
converted into a pram for children from borth until
the child can sit up by itself or it reaches a weight
of 9kgs.
Remove the hood and apron if they are fitted.
Raise the leg rest into its highest position, see
page 5.
Pull the bumper bar out to its fully extended
position, see page 6.
IMPORTANT: Ensure that both ends of the bumper
bar are locked into the armrests when extended.
Never convert into a pram with the bumper bar not
extended.
22•Unfasten the press studs on the sides of the
backrest and lift the material clear of the sides.
Unfasted two more press studs on the side of the
back restand again lift the material clear of the
sides.
Fold the cover down over the front of the bumper
bar.
23•Zip the top of the backrest cover to the front of
the footrest cover.
Push the cover down onto the seat.
Now tuck the flaps that you unfastened in step 24