Malvern Instruments Zetasizer Series, Basic Reference Manual

Page: 78 / 123

Measure DocumentDocument dialog
Initiates the Measure Document dialog
Measure DurationMeasurement duration
Sets experiment duration. Execution of this command will set the measurement duration of the
measurement relevent to the current mode. For example in Intensity mode the durations of the
TimeTrace/AngleScan measurements will be set.
Measure ZLimitsZLower , ZUpper
Set Zeta potential range. This defines the modulator frequency in a measurement sequence.
The modulator frequency is set as follows:
ZUpper 0 - 250 Hz
ZUpper 0 + 250 Hz
ZUpper = 0 + 1000Hz
MeasureTemperatureLowerTemp, UpperTemp
Set lower and upper limits for a temperature scan in size or zeta mode.
Measure AngleLowerAngle, UpperAngle
Set lower and upper limits for an angle scan in size mode.
Measure Multiple[,Number_measures]
Do ACCF measurement with Number_measures sub-measures. If Number_measures is missing
then 10 is used by default.
Measure Capscan
Performs capillary scan of n measurements.
MeasureInspect b
Set Inspect Live Data on/off depending on whether b is 1 or 0.
Measure Setup
Initiates the Setup Measurement dialog
4.96 Merit Function
Application
Results information about Size record.
Syntax
Merit
Notes
The percentage of (correlation_intercept - baseline)/baseline. Typically 10 - 60 %.
4.97 Message Function
Application
Notification messages to user.
Syntax
Message caption$, message$, style
MAN0179
Page 4.40 Zetasizer 1000/2000/3000/4000/5000/4700
Artisan Scientific - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisan-scientific.com