1
、
Turn on the power switch, LED display Environment
temperature, the appliance is standby.
2
、
At the right side of the appliance base have a switch,
Press “START/STOP”, High heat, press again, the
appliance will shutdown.
3
、
All function need to be operated by remote control.
4
、
Fan keep working for 30 seconds when shutdown
the appliance(after heating)
Note: The indicator lights when corresponding function is
working
Display symbol description:
：
FAN
：
Low heat
1000W
：
High heat
2000W
：
Timer
：
Week timer
：
Light on:
set temperature mode,
temperature range 18-45
℃
Light flickering:
Open window detection start up.
PTC-3020L-E with
Remote control.
without Swing function.
Remote control:
Power
Press “
” as follows: ON(Fan working), OFF(Fan keep working for 30 seconds
when shutdown the appliance after heating).
Heating
Press “
”
as follows: Low heat, High heat, FAN working.
Timer
Press “
” to set timer as follows: 1H,2H,3H.....8H. When week timer is start up,
you can not set this timer function.
Swing
Press “
”
as follows:, SWING ON, SWING OFF
Note: PTC-3018L-E
、
PTC-3019L-E
、
PTC-3020L-E Without Swing function.
Set
Set
temper
ature
mode
Light
1
、
Press “
”, set temperature mode is stand by, Press “+” “-” to adjust
temperature, Temperature range: 18-45
℃
.
Press “-”,
Set temperature is equal to or lower than Environment temperature, stop
17/38
