background image

7

MegaPod User Instruction Manual

MaltaDynamics.com | 800-494-1840

Visit www.MaltaDynamics.com for the latest user 

instruction manual based upon date of manufacture.

•  Not all fall protection components are rated for the same user weight 

capacity. ONLY use components rated for the same weight capacity.

•  This equipment is designed to be used in temperatures ranging from 

-40ºF to +130ºF (-40°C to +54°C).

•  Connection of a snap hook to a D-Ring, rebar, or other connection point 

of improper dimensions in relation to the snap hook dimensions or 
configurations that could cause the snap hook keeper to be depressed 
by a turning motion of the snap hook, or such that snap hook or 
carabiner will not fully close and lock, or that roll-out could occur.

•  Illustration 3

 depicts examples of inappropriate connections:

Illustration 3: Inappropriate Connections

NOTE: 

Other than 3,600 lb. (16 kN) gated hooks, large throat opening snap hooks 

should not be connected to standard size D-rings or similar objects which will 

result in a load on the gate if the hook or D-ring twists or rotates. Large throat 

snap hooks are designed for use on fixed structural elements such as rebar or 

cross members that are not shaped in a way that can capture the gate of the 

hook.

4. CONNECTING SUB-SYSTEMS:

 

Personal fall arrest systems used with this equipment must meet applicable 

state, OSHA and ANSI requirements. A full body harness must be worn when 

this equipment is used as a component of a personal fall arrest system. As 

required by OSHA, the personal fall arrest system must be capable of arresting 

the user’s fall with a maximum arresting force of 1,800 lbs. (8 kN), and limit the 

free fall to 6 ft. (1.8 m) or less. 

• Rescue Plan: 

Rescue operation must be performed by the trained and competent 

personal. The rescue operation must be performed under the supervision of the 

rescue expert team or personal. It is advised that while working on site work in 

pairs. Before going for the work the user must have the rescue plan according to 

the work.

Summary of Contents for R0007

















Reviews: