background image

Easy Slider I-Beam Anchor

 User Instruction 

Manual

 

MaltaDynamics.com | 800-494-1840

6

Manual Revision Code:

 

M

ARCH 30,2021

LIMITATIONS FOR USE

Do not use this equipment if you are unable to tolerate the impact of a 
fall arrest. Age and fitness can seriously affect your ability to withstand 
a fall. Consult with a physician if in doubt. Minors, pregnant women, 
and anyone with a history of back and/or neck problems must not use 
this equipment.

1. The anchorage connector is designed for single user, with a capacity up

to 310 lbs (140 kg) including
clothing, tools, etc.

2. The anchorage connector may only be loaded as shown in the

LOADING CONDITIONS DIAGRAM.

3. The anchorage connector is designed to be used in temperatures

ranging from -40ºF to +130ºF (-40°C to +54°C).

4. Do not expose the anchorage connector to chemicals or harsh solutions

which may have a harmful effect.

5. Do not alter or modify this product in anyway.
6. Caution must be taken when using any component of a fall protection,

work positioning, rope access, or rescue system near moving
machinery, electrical hazards, sharp edges, or abrasive surfaces, as
contact may cause equipment failure, personal injury, or death.

7. Do not use/install equipment without proper training by a “competent

person” as defined by OSHA 29
CFR 1926.32(f).

8. Do not remove the labeling from this product.
9. Additional requirements and limitations may apply depending on

anchorage type and fastening option utilized for installation. All

placements must be approved by an engineer or other qualified person.

10. This anchorage connector should not be used as part of a horizontal

lifeline system that has not been designed and or approved to be used
with 5,000-lbf anchorage connectors.

11. The anchorage connetor should only be used for personal fall protection

and not for lifting equipment.

The anchorage connector shall not be used outside its limitations, or 

for any purpose other than that for which it is intended.

Summary of Contents for A6101


















Reviews:

Related manuals for A6101