Easy Slider I-Beam Anchor
User Instruction
Manual
MaltaDynamics.com | 800-494-1840
4
Manual Revision Code:
M
ARCH 30,2021
UNDER PENALTY OF LAW
This manual must be read and understood in its entirety, and used as part of a
fall protection training program, as required by OSHA or any state/local regulatory
agencies. This instruction manual is intended to meet industry standards required
by ANSI Z359.18-2017 and should be used as part of an Employee Fall Safety
Training Program as required by OSHA. User must read and fully understand the
limitations and proper use of equipment. All users must be properly trained by
their employer prior to use, per OSHA 29 CFR 1910.66, 29 CFR 1926.503, and
applicable local standards.
NOTE:
This
User Instruction Manual
is not to be removed except by the equipment
user. Current
User Instruction Manuals
must always be available to the user. Read
and understand these instructions before using equipment.
Do not discard these
instructions.
Misuse or failure to follow warnings, instructions, and limitations
on the use of this equipment may result in serious personal
injury or death. For further instructions about proper use, refer
to a supervisor or contact Malta Dynamics at 1-800-494-1840.
MATERIALS AND CONSTRUCTION
• Hardware:
Plated alloy steel, 5000 lbs. minimum breaking
strength
and Aluminum alloy.
PURPOSE
The A610
1
is an anchorage connector designed to function as an interface
between the anchorage and a fall protection, work positioning, rope access, or
rescue system for the purpose of coupling the system to the anchorage. Any
references to “anchorage connector” in this manual include, and apply to, the
A610
1
.
