1
5
Easy Slider I-Beam Anchor
Instruction Manual
MaltaDynamics.com | 800-494-1840
Visit www.MaltaDynamics.com for the latest user
instruction manual based upon date of manufacture.
MAINTENANCE & CLEANING
Wipe off all surface dirt.
Clean with compressed air and/or a stiff brush using
plain water or a mild soap and water solution to
clean away contaminants; wipe
hardware dry with a clean cloth. Hang away from heat and allow to dry
completely. Store in dry, clean environment away from direct sunlight and
excessive heat. Avoid storage in areas where chemical vapors may exist.
Thoroughly inspect lanyard after extended storage.
Frequency:
• All equipment must be visually inspected prior to each use according to the
manufacturer’s instructions included at time of shipment. Inspections must be
performed by a Competent Person other than the user (as defined by OSHA) a
minimum of
once
per year.
• Record the results of each formal inspection in your Hog Tracker account or
inspection log.
•
•
NOTE: Per Cal/OSHA PFAS must be inspected by a competent person at least
once
a year, in accordance with the manufacturer’s recommendations, with
inspection dates documented.
Repairs to the Easy Slider I-Beam anchor can only be made by a Malta
Dynamics Fall Protection representative or an entity authorized by Malta
Dynamics. Contact us for all maintenance and repair needs or to inquire about
a return at: 1-800-494-1840.
Harsh weather and harsh environments, prolonged use, and
other extreme working conditions may require you to have this
inspected by a competent or qualified person than yourself at
least
once
a year.
