25
4. Put wood screws into the rubber washer, and fix the bottom case on the wall or ceiling, then
cover up the front cover and tighten it with screws.(See Fig. 9).
Fig. 8
Rubber
washer
Front cover
inside view
Rubber strip
•
DO NOT take off the rubber strip and make sure it lies in the front cover perfectly (See Fig. 8).
•
Click sound shows the upper hook has been fastened into slot (See .Fig. 9-A), and a second
click sound shows the lower hook has been fastened into slot ( See Fig. 9-B).Please make sure
front cover is locked well on bottom case (See Fig. 9-C), If not (See Fig. 9-D), water will enter
into the inside of product to cause danger of human body.
NOTE
Fig. 9-A
Fig. 9-B
Fig. 9-C
Fig. 9-D
Fig. 10
1
2
3
5
4
6
7
8
Corner / recess mount with wall bracket.
1. 8-knock-out wall bracket is designed for various application ( See Fig. 10), break the knock-
out to feed the wires through the corresponding hole.
2. Break screw knock-outs (See Fig. 10), then fix the wall bracket onto recess / corner with
wood screws (See Fig. 11-A & Fig. 11-B), make sure “UP”mark upwards. refer to wall mount
1-3 to connect power cables, and fix the (See Fig. 12), then assembly front cover.
Hook
Hook
Click
Click
Click
Slot
Slot
Screw support
Cable entry
knock-out
Cable entry
knock-out
1-8 holes are
screw knock-outs
