67
Assembling the mixer blades
Drum assembly (1)
(assembled on stand)
x 1
Mixer blade (2)
x 2
Mounting set bag E
Washer (A)
x 4
Washer (thin) (B)
x 8
Rubber gasket (C)
x 4
Nut M8 (D)
x 4
Bolt M8 x 20 mm (E)
x 4
5. Align the markings and place the upper drum (1a) onto the lower part (1b).
6. Secure the connection with bolts (F), spring washers (E) and washers (D) (Fig. 6).
1b
1a
F
E
G
Fig. 6
1. Align the holes and assemble the mixer blade (2) onto the drum assembly (1).
2. Secure the connection with bolts (E), washers (A), washers thin (B) , rubber gaskets
(C) and nuts (D) (Fig. 7).
3. Repeat the assembly for another mixer blade.
NOTE: Position the mixer blades inside the drum assembly with the point-
ed end facing downward. The shape bend on the blades should point in
the direction of the rotation direction of the drum.
Summary of Contents for JFC180A
