15
9. The supply cord should be regularly examined for signs of damage. If the supply
cord is damaged, it must be replaced by the manufacturer, its service agent or
similarly qualified persons in order to avoid a hazard.
10. This appliance is intended for household use only and not for commercial
applications.
11. Never use the appliance outdoors and always place it in a dry environment.
12. Always remove the plug from the socket after ironing, before cleaning the
appliance, when filling the water tank and also when you leave the iron even for
a short while.
13. do not allow the supply cord to touch the hot soleplate or to come into contact
with any heat source.
14. Keep the supply cord out of reach of children. Never unplug or move the
appliance by pulling the cord.
15. Never touch the hot soleplate to avoid burn.
16. The temperature of steam is very high, do not eject steam towards the body to
avoid scalding.
17. When ironing different materials, always start from the lowest temperature
materials.
18. The iron may give off some smoke and smell when you use it for the first time
because of the oil on some parts, it will disappear soon.
19. Make sure the ambient temperature is above 0°C, otherwise the appliance does
not function properly.
20. Always use the self-clean function regularly to ensure optimum performance
and prevent malfunction.
21. do not put perfume, vinegar, starch, descaling agents, ironing aids or other
chemicals in the water tank.
22. Make sure the appliance has cooled down before cleaning or storing.
THE OPERATION METHOd
Important:
Remove any sticker, protective foil or plastic from the soleplate and clean it with a
•
soft cloth before first use.
When using the function of variable steam, burst of steam or water spraying,
•
make sure that there is enough water in the water tank.
1. How to fill water
Make sure the appliance is unplugged and set the variable steam control to
•
“OFF” position before filling water.
Hold the iron and open the water filling cover, use the measure cup to fill the
•
water tank up to the MAX level. Tilt the iron backwards to check if the water level
has reached the “MAX” mark.
Note: Never fill the water tank beyond the MAX level.
