Malloca MWC-89S, User Manual

Page: 2 / 7

2
IMPORTANT SAFETY INSTRUCTIONS

WARNING

To reduce the risk of fire, electrical shock, or injury when using you
appliance, follow these basic precautions
·Read all instructions before using the Wine Cooler.
Technical specifications may be subject to the entity or rating label without notice since
products are under continuous improvement. No prior notice will be given for any
changes of technical specifications or spare parts .
· DANGER or WARNING : Risk of child entrapment.
Child entrapment and suffocation are not problems of the past. Junked or abandoned
appliances are still dangerous…even if they will “just sit in the garage a few days”.
· Before you throw away your old Wine Cooler or any appliance: Remove the door.
Leave the shelves in place so that children may not easily climb inside.
·Never allow children to operate, play with, or crawl inside the appliance.
· Never clean appliance parts with flammable fluids. The fumes can create a fire hazard
or explosion.
·Do not store or use gasoline or any other flammable vapors and liquids in the vicinity of
this or any other appliance. The fumes can create a fire hazard or explosion.
1.This product can not be taken alone by infants, disabled, sensory disabled, psychotic,
those who lack of experiences and civilization.
2.If the power cord is damaged, in order to avoid risks, it must be repaired by the
manufacturer, the maintenance department or similar professionals.
This appliance cannot be used by the weakness, slowness response or mentally
handicapped people, unless with the guidance of responsibilities
If the power cord is damaged, needs professional maintenance, not secretly replaced.
-Save these instructions-
INSTALLATION INSTRUCTIONS
Before Using Your Wine Cooler
·Remove the exterior and interior packing.
·Before connecting the Wine Cooler to the power source, let it stand upright for
approximately 2 hours. This will reduce the possibility of a malfunction in the cooling
system from handling during transportation.
·Clean the interior surface with lukewarm water using a soft cloth.
·Install the handle on the left side of the door.
Installation of Your Wine Cooler
·This appliance is designed for free standing or built-in (full recessed) installation.
· Place your Wine Cooler on a floor that is strong enough to support it when it is fully
loaded. To level your Wine Cooler, adjust the front leveling legs at the bottom of the
Wine Cooler .
·Locate the Wine Cellar away from direct sunlight and sources of heat (stove, heater,
radiator, etc.). Direct sunlight may affect the acrylic coating and heat sources may
increase electrical consumption. Extreme cold ambient temperatures may also cause
the unit not to perform properly.