Precautions for installation
The cooler shall not be tilted over 45° when being handled, and it can be electrified only 10 minutes
after handling operation.
The cooler must be placed on a flat and solid ground surface. If it needs to be elevated, a stable,
solid and inflammable pad shall be used. Never use the packaging foam as the pad to elevate the
cooler.
Do not place the cooler in the area exposed to moisture or water splash. The water splash or dirt on
the cooler shall be timely removed using the soft cloth to prevent rusting and impairment of electric
insulativity.
Do not place the cooler in an environment prone to be iced, nor use it in the rain. The cooler shall be
kept far away from the heat source and protected against sunshine, to avoid influencing the normal
operation of the cooler.
Insert the power line plug into the power socket as indicated on the nameplate, electrify the cooler
for trial operation, and if you feel an abrupt reduction of temperature within one hour, the cooler
works normally. Thereafter, you can store wines into the cooler.
As the cooler is installed in the cabinet, the cabinet shall be well ventilated; otherwise the normal
operation of the cooler may be adversely influenced. The cabinet shall not be provided with a back
plate, and the heat dissipation shall satisfy following requirements:
8
