Malibu Boats Boat 2014, Owner'S Manual

Page: 47 / 164

2-23
MaliView Cruise Screen
Ballast Tank Levels and Fill Status
• Press “CRUISE” to enter cruise mode and to toggle between “SPEED” and “RPM”
cruise modes.
• The up and down arrows will change the set-point in both “SPEED” and “RPM”
cruise modes.
• Use the “ON/OFF/ENTER” button to turn the cruise on or off.
• Press “MUTE” to mute the radio.
• Press “SAVE PRE-SET” to save or edit a pre-set. (See “Pre-Set” page.) This button
will also allow you to temporarily disable any alarm.
When the system has engaged, the throttle bar will turn green.
When the throttle is pushed past the ENGAGED gap, the system will give more speed as
well as turn red.
NOTES:
• The gap appears when the engine has activated cruise and has control of the throttle.
• The cruise must be turned on or off when the actual speed is below the set-point.
• The cruise will only hold speed if the arrow is in the gap and is green.
• The cruise can be turned off at any time but will not disengage until the throttle has
returned below the gap.
F C L R MLS RIDER
100
0%
CURRENT
STOW
A STEP BEYOND
Rider
Picture
Wedge
angle
screen
Indicates the
wake shaping
zone
Red indicates the filling status Green indicates the target level
Rider Name
12.0 17.0
MPH ACTUAL
MPH SET
SPEED ON
100%
0%
SETUP
PRE-SETS
GAUGES
MEDIA
ON / OFF
ENTER
STEREO 2
FM1
101.7
VOLT
TEMP
OIL
11.8 V
185 ºF
65 PSI
E F
SA
VE
PRE-SET
MUTE
F C L R MLS RIDER
100
0%
CURRENT
STOW
A STEP BEYOND
CRUISE
100%
0%
SPEED ENGAGED
100%
0%
SPEED OVER