manualshive.com logo in svg

Malibu Boats 2011 21 Ride, Owner'S Manual, Page: 161 / 170

Share
Download
Malibu Boats 2011 21 Ride Owner'S Manual Download Page 161

2011 M

ALIBU

B

OATS

L

IMITED

W

ARRANTY

Thank you for choosing to purchase a Malibu Boats, LLC (“Malibu
Boats”) product. Malibu Boats is committed to assuring your satisfaction
with your new boat. Malibu Boats will provide for repairs to your boat
during the applicable warranty periods in accordance with the following
terms, conditions and limitations. 

Warranty Coverage - Summary

The warranty coverages are summarized below. Please refer to the warranty details that
follow for complete terms, conditions, and limitations.

In addition to the Malibu Limited Warranty, your boat also comes with other limited
warranties provided by the engine and trailer manufacturers, among other items. Please
refer to their limited warranty disclosures for details, including their terms, conditions
and limitations.

Malibu Boats Limited Warranty

Coverage Type

Coverage Period

Transferable

Base Limited Warranty

36 Months

Yes

Tower Structural Limited
Warranty

36 Months

Yes

Tower Cosmetic Limited Warranty 12 Months

No

Gelcoat Limited Warranty

24 Months

No

Hull Limited Warranty

Lifetime

Yes

Warranty_11_Malibu_ Chapter 4 doc.qxd  12/13/10  11:08 AM  Page 1

Summary of Contents for 2011 21 Ride











































































































































































Reviews:

No comments