ATTACK
HOLD
DECAY
SUSTAIN
RELEASE
QUAD ENVELOPE
GATE IN
F S T
CLEAR GATE LOOP
RECORD
FOR
REV
PEN
RAN
ATTACK
HOLD
DECAY
SUSTAIN
RELEASE
GATE IN
F S T
CLEAR GATE LOOP
RECORD
FOR
REV
PEN
RAN
ATTACK
HOLD
DECAY
SUSTAIN
RELEASE
QUAD ENVELOPE
GATE IN
F S T
CLEAR GATE LOOP
RECORD
FOR
REV
PEN
RAN
YOUR FIRST PATCH
1. Patch output 1 of the Quad Envelope to a module with CV input for
modulation.
2. Patch a clock source into CLK IN and make sure you are receiving clock
(you will see the LED bargraph moving indicating that the sequencer is active
and you are receiving clock).
3. Patch a gate in from an external source to the GATE INPUT JACK #1.
4. Press envelope BUTTON 1
6. Move the sliders for
ATTACK, HOLD, DECAY, SUSTAIN and RELEASE
to your
liking. Or you can hold RECORD while moving the sliders to record slider
movements to a sequence.
7. If you have recorded slider movements to a sequence, set the switch for the
sequencer direction to your liking. You will now hear your recorded slider
movements play back in the forward, reverse, pendulum or random direction.
8. If you want to clear what you’ve recorded to the sequencer, hold the CLEAR
button and move a slider to clear that parameter.
9. Follow steps 1-6 on each envelope channel or change it up a bit (each
envelope channel can be fully edited).
10. There is an auto-save function. After making your final setting, wait 10
seconds before you power down. Then recycle your power and your settings
will recall on power-up. If you are using the Varigate 8+ or the Varigate 4+ on
the same power bus, you can utilize the memory power of these modules to
save Quad Envelope presets (up to 100 presets with the V8+ and 16 presets
with the V4+).
Visit malekkoheavyindustry.com to read the full manual and register your product for warranty!
5. Set the speed (Fast or Slow).
CONNECT POWER CABLE WITH
RED STRIPE TO WHITE LINE