03.A
13-05-03
Step 1
Removing the top cover (B360):
(a)
Use a crosshead screwdriver to remove the two screws (
B440
)
securing the back of the top cover panel (
B360
).
(b)
Lift the back part of the cover and push it forwards to remove it.
(c)
To re-assemble, follow the same procedure in reverse order.
Tools necessary for dismantling the various parts of the appliance:
Battery driven screwdriver
with Ø 4 mm drill bit for metal
Pliers
7, 10 and 13 mm open
ended spanners
10 and 13 mm
box spanners
Flat screwdriver
Long crosshead screwdriver
Utensile per montaggio
cinghia di trasmissione
codice 268014600
Torx T20 screwdriver
Step 2
Removing and/or dismantling the programmer knob:
(a)
Grasp the knob and pull it out gently.
(b)
Remove the knob cover (
B740
) together with the pointer (
B013
) and
cover plate (
B730
) by levering delicately on the lugs. Then carefully
remove the pieces.
(c)
Recover the two springs (
B750
), cam (B220) and spring (
B067
).
(d)
To re-assemble, follow the same procedure in reverse order.
MAINTENANCE PROCEDURES
B360
B440
Ø 4mm
DASVDFFB
VV, LBB 2
B750
B013
B220
B730
B740
B067
