USER INSTRUCTIONS
1.
Instructions, and information about using the battery, and maximizing
its life span:
ATTENTION! The life span of the battery depends on you as well! Please keep
using the product as described in this manual to maximize its life span for your
pleasure:
•
Whenever you turn off your light after use, please make sure that
the battery did not run low. If that happens (the light indicates low
voltage by decreasing the luminosity), please load the battery!
•
It is recommended to full-charge the light before first use!
•
If you do not use your light for a longer period, please always pay
attention to full-charge the battery ONCE A MONTH! The light can be
stored on the shelf for another month after that. A long-term storage
of the light with totally discharged battery may significantly reduce
the life span of the battery, or may damage the battery!
ATTENTION! THE STANDBY OPERATION OF THE LIGHT CONSUMES BATTERY
CHARGE AS WELL, WHICH MEANS THAT THE BATTERY IS BEING DISCHARGED
SLOWLY EVEN WHEN YOU DO NOT USE YOUR LIGHT! THAT IS WHY IT IS KEY
ESSENTIAL TO KEEP THE ABOVE WRITTEN INSTRUCTIONS!
2.
Instructions for solar charging, information about charging the
battery:
•
Please pay attention to keep the solar panel clean. Please follow
“Cleaning instructions” below for cleaning your light!
•
Below the LEDs the indicator light keeps blinking until the solar panel
receives enough light for charging. Depending on the level of charge
in the battery the blinking light can be red, yellow or green. Once
the indicator light stops blinking, it means the solar panel does not
receive sufficient light to charge the battery. Continuous green light
means the the battery is full-charged.
•
In order to maximize the efficiency of solar charging, please set the
solar panel to approximately 45 degrees with the solar panel facing
towards the midday sun.
5
Summary of Contents for EMERALD PRO INDUSTRY
Page 2: ...2 ...
