USER INSTRUCTIONS, INFORMATION
1.
After receiving your light, please open the light’s box gently with paying
attention not to cause harm to the light and its parts.
2.
Before starting to use your light, please make sure that there are no
visible damages on the light and its parts.
3.
If you observe breaking, crack, fracture on the light or on its parts,
please do not use the product, but contact us for replacement.
4.
Please do not apply strong physical force on the product that can
damage the light or its parts. Non-ordinary use of the product results
the loss of product warranty.
5.
Please keep the box, the packaging material, and the content out of the
reach of children, and pets. There are small objects among the parts
of the light, which children or pets can ingest, or can cause harm to
themselves with.
6.
Please do not disassemble the light, do not bend the light, or apply
physical stress on the light. Please follow the user manual’s instructions
for installation, and operation.
7.
Do not expose the light to higher heat than natural caused by weather
changes. Excessive heat may damage more constituents of the light.
8.
Do not expose the light to continuous high- or low-pressure water flow,
even if you intend to clean your light. The IP65 protection does not mean
you can put the light in water, or you can wash the light with continuous
water stream. The next chapter declares the right method of cleaning.
9.
Please always contact Malatech Water, Ltd, or a professional appointed
by our company if you intend to disassemble the light, remove any
of its parts, or service the light. Service attempts made by users are
prohibited, and result the loss of product warranty.
For preserving the aesthetical outlook, and maintaining the maximum
functionality, and efficiency of your light, cleaning is recommended from
time to time. Since the light is operated by solar energy, keeping the solar
panel clean & free of dust is key-essential to ensure its efficiency, and
maximize discharging time. Please follow the instructions below when
cleaning your light:
1.
Please always use a suitable, soft, and damp towel for cleaning the solar
panel
2.
Apply the towel with higher water content for the first time at each
cleaning procedure to remove the majority of dust preferably with one
movement.
3.
After washing the towel in continuous water stream to remove the
accumulated dust, squeeze the water out of the towel, and remove the
remainder of dust with the towel gently from the surface of the solar
panel if necessary. Care to avoid scratching the surface of the solar
panel.
4.
If you observe scaling, or other accumulated dirt on the surface of the
solar panel, please only use a chemical or natural enzymatic based
agent for cleaning which is recommended for solar panel cleaning by
its manufacturer.
5.
Cleaning of the plastic and metal parts of the light body can be executed
easily, but attention is needed to avoid scratching of the surfaces.ű6)
Cleaning the dome which protects the LED group from external effects
also requires cautious approach for cleaning to avoid scratching. Please
apply chapter 1)-4) above for the dome as it is written in case of the
solar panel.
The light recognizes low battery voltage, and switches off automatically
to prevent the battery from damage, and to maximize the life cycle of the
battery. Besides that, the light applies an eco-mode when the battery
level is low but sufficient for operation. In this case the light will shine at
a dimmed mode.
Please charge your light whenever any of the above
written occurs!
AUTOMATIC BATTERY PROTECTION
CLEANING INSTRUCTIONS
8
9
