PRODUCT INSTALLATION AND OPERATION INSTRUCTIONS
ATTENTION!
Time-controlled operation increases the life span of the battery. It is
recommended to use the time control functions, or to turn off the light
by the remote control if you do not need the lights to shine (e.g. at late
night or break of dawn).
If you keep your finger for 4 seconds on the ON signal, the light switches
to default mode (cold white light color, maximum power).
You can control 50 lights at the same time with the 2.4G remote control
in 25 m radius (considering no obstacles in the area, and sufficient
charge in remote control’s batteries).
The batteries supplied for the remote control are recommended to be
changed for rechargeable batteries once they reach the end of their life
span. PLEASE PAY ATTENTION: THE STAND-BY MODE OF THE REMOTE
CONTROL, AS WELL AS THE REGULAR USE OF THE REMOTE CONTROL
CONSUMES A DECENT AMOUNT OF ENERGY. IT IS RECOMMENDED TO
REMOVE THE BATTERIES FROM THE REMOTE-CONTROL UNIT ONCE
YOU CUSTOMIZED, AND SET UP YOUR LIGHT CORRECTLY, STORE THEM
SEPARATELY, AND ONLY PUT THEM BACK IN THE REMOTE CONTROL
WHEN YOU NEED THE REMOTE CONTROL!
The light blinks 2 times when it receives any of the time-controlled
operation commands.
It is recommended to reduce the power of the light in case of constantly
cloudy, rainy, overcast, cold weather days, if longer operation is needed
during night-time.
If the light does not receive the commands of the remote-control unit,
please restart the light system. You can do it by clicking the main ON/
OFF button 2 times (turning OFF and ON the light) located at the top part
of the column inside, like it is described above in chapter “Installation of
the light” (paragraph 5). If the light still does not react on the commands
of the remote control, please change the batteries in the remote control
since the cause could be discharged or faulted batteries.
To maximize the discharge time of your light, and preserve its good
aesthetical outlook, please follow the instructions given in “Cleaning
instructions” (please find this chapter below). PLEASE PAY EXTRA
ATTENTION TO THE RIGHT CLEANING METHOD OF THE POLYCARBONATE
PARTS (DOME)!
7
Summary of Contents for AMETHYST 90
Page 2: ...2 ...
