background image

LIGHT DIMENSIONS, CONTENT OF THE BOX

Dimensions are given

in mm unit.

ATTENTION! The life span of the battery depends on you as well! Please 

use the light correctly as described in this manual by positioning it 

in  a  sunny  place  where  sufficient  sunlight  is  provided  for  charging 

the battery every day. If you intend to turn off your light, and you do 

not  want  to  use  it  for  a  while,  please  make  sure  that  the  battery  has 

sufficient  charge,  and  it  is  not  totally  discharged.  If  you  would  like  to 

store the light instead of using it, please turn off the light with the ON/

OFF button. In case of a longer storage, please turn on the light once 

every month, put it in a sunny place in the morning, and turn it off at 

dusk. In this case the light can be stored again for another month.  It 

may decrease the life span of the battery if the light is stored for a longer 

period with a totally discharged battery, moreover it can damage the 

battery!

ATTENTION!  The  light  sensor  switches  off  the  light  even  at  night  if  it 

receives high luminosity lighting from above! Do not place your light in 

a position where other light sources can hinder its operation (e.g. do not 

place the light below high luminosity street light)!

ATTENTION! Battery is built-in, non-replaceable!

Content of the box:

1. 

Amethyst 90 solar light

2. 

Screws & anchors for fixing 

(4 pcs)

3. 

Allen key

4. 

2.4G remote control 

(1 remote control unit is supplied 

for 1-50 pcs of light ordered. If 

you would like to order more 

remote-control units, please 

order them as separate items)

Dimensions of the light:

1

3

2

4

4

Summary of Contents for AMETHYST 90















Reviews: