- 7 -
SYSTEM CONNECTION
◆
Please turn off all relevant power before connection for the sake of safety.
◆
There are 5.1ch Audio Out, S-Video Out, Digital Audio Out (Optical, Coaxial) and
Component Out, etc. You can choose any one to connect.
TV
The connection is shown as following:
In this figure, there are VIDEO OUT, S-VIDEO OUT and COMPONENT OUT. If the TV has
S-VIDEO IN or COMPONENT IN jack, you can achieve more vivid picture by connecting this
jack.
REAR PANEL
1. Y Pb Pr connection
Composite video output is defaulted to be the original status of DVD player. If a displaying
equipment with Y Pb Pr jacks is connected, then you need to set up the player besides
connecting the jacks with three Y Pb Pr cables:
1) In stop status, press SETUP button to enter the main menu.
2) Use Up/Down direction button to select “VIDEO OUTPUT” in “PREFERENCES”.
3) Select “Y Pb Pr” output in “VIDEO OUTPUT” and then press OK button to exit.
4) Press PS button on remote control (shift in interlaced or progressive status) to shift to
progressive scanning output status.
5) Shift the displaying status of the TV to “Y PB PR”.
