6
08.06
PAGE
ISSUE
B
MADISON 125 cc
Checking Switches
CHAPTER
ENGLISH
CHECKING SWITCHES
CHECKING PROCEDURES
- Using a
Tester (code n°08609500)
, check switches. In particular, check continuity between terminals to make
sure they are correctly connected.
- Replace the switch, even if only one of the possible combinations does not give the requested result.
Set the tester to function
:
:
:
:
:
.
CONNECTION OF SWITCHES DESCRIBED IN THIS MANUAL
- This manual contains connection diagrams, like the one illustrated here below, which illustrate how switch
terminals should be connected (key switch, brake switch, “Mode” button, etc.).
- The first column from the left indicates the different positions of the switch, the top line the colour of the wires
connected to the switch terminals.
- The
symbol identifies terminals in which there is a condition of continuity, i.e. a closed circuit, in a certain
position of the switch.
- In this diagram:
- “B/R”
and
“N”
: there is continuous contact when the switch is “
ON”.
F. 1
F. 2
