7
The array option connects to the main ProEx unit by means of two 25-DSUB connectors, see Figure
2.4 below. It is powered from the main unit and has no external power connector.
Fig. 2.4
Connectors for attaching the MIRA option to the main ProEx unit.
One side of the array option has coaxial connectors for the receiver and transmitter trig lines. The
number of lines is dependent on how the system was ordered. The MIRA option in Fig. 2.5 is for
maximum 10 receivers and transmitters. The standard array option is equipped to handle 16 channels.
Fig. 2.5.
On one side of the array option, the receive and transmit trig signals cables are connected
(left) and on the other side connectors for the digital data lines from the receiver antennas are found
(right).
The array option is fastened to the main unit with help of screws and small metal plates. See Fig.2.6.
