27
14. EFFICIENT USE OF BIOLERS IN TERMS OF ENERGY CONSUMPTION
Points to be considered about efficient energy use in houses, are stated below:
•
There is %25-40 heat loss on the wall of buildings. The first precaution for
energy efficiency and low fuel consumption, must be enhancing the
isolation. For this purpose, outer walls of the building must be isolated from
outside or inside.
•
There is %20- 25 heat loss from the roofs.Heat isolation must be done in
cold roofs lofts
according
to
EN
standarts.
•
Air and moisture leakage of the doors and windows in house must be
provided with proper materials.
•
Double- glazed windows and doors, making shutter and blinds will
decimate the heat loss.
•
If there is air and moisture leakage connection points of door and window
frames and walls will be filled up with filling material plaster,paste or
silicone.
•
Outer doors or other doors belong to the unwarmed places (bathroom,
corridor) must be closed as far as possible.
•
Most of the cold air flow becomes from under the door. Spaces under the
doors can be filled with an elastic material filling.
•
Building doors shouldn't left open, double door or automatic closing
systems must be applied.
•
It is recommended to clean the windows for receiving more sunlight, close
the curtains at nights, leave south, west, southwest and southeast position
curtains open that are receiveing direct sunlight at winter time.
•
Temperature shouldn't be increased more than adequate in winter time.
•
When the temperature is too much, heater's regulation must be down
instead of opening windows.
•
Moist air retain the heat well. In order to increase the felt temperature full
of
water pot can be put on radiators. In this way place can be moisturised.
%50-55 air moisturing provides reducing vaporization and provides feeling
temperature 2-3 ºC more.
•
Marble etc. materials and covers shouldn't place on and laundry shouldn't
make dried on radiators.
•
One side aluminium covered thermal insulting boards shouldn't be placed
behind
the radiators and between radiator and wall.
•
In unused parts of the house, temperature adjustment must be in minimum
level.
Also isolation of hot water pipes must be done in unheated parts of
the house.