8
Side grip (auxiliary handle) (Accessory)
Align the hole in the grip holder with the hole in the blade case (upper blade
guard) and secure the grip holder onto the blade case using the screw as
shown in the figure. Securely screw the side grip clockwise into the hole in the
grip holder.
Hex wrench storage
When not in use, store the hex wrench as shown in the figure to keep it from
being lost.
OPERATION
CAUTION:
•
Be sure to move the tool forward in a straight line gently. Forcing or
twisting the tool will result in overheating the motor and dangerous
kickback, possibly causing severe injury.
Hold the tool firmly. Set the base plate on the workpiece to be cut without the
blade making any contact. Then turn the tool on and wait until the blade attains
full speed. Now simply move the tool forward over the workpiece surface,
keeping it flat and advancing slowly until the sawing is completed. To get clear
cuts, keep your sawing line straight and your speed of advancing uniform.
Rip fence (Guide rule)
The handy rip fence allows you to do extra-accurate straight cuts. Simply slide
the rip fence up snugly against the side of the workpiece and secure it in posi-
tion with the screw on the front of the base. It also makes repeated cuts of uni-
form width possible.
004034
004035
005339
1. Screw
2. Rip fence
1
2
005340
