
2
SPECIFICATIONS
• Due to our continuing programme of research and development, the specifications herein are subject to change
without notice.
• Note: Specifications may differ from country to country.
Symbols
END103-1
The following shows the symbol used for the tool. Be
sure that you understand their meaning before use.
...................Read instruction manual.
Intended use
The tool is intended for flush trimming and profiling of
wood, plastic and similar materials.
Power supply
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and
can only be operated on single-phase AC supply. This
tool should be grounded while in use to protect the oper-
ator from electric shock. Use only three-wire extension
cords which have three-prong grounding-type plugs and
three-pole receptacles which accept the tool’s plug.
Model
MT370
Collet chuck capacity
6.35 mm (1/4”) or 6.0 mm
No load speed (min
-1
)
35,000
Overall length
199 mm
Net weight
1.6 kg
Safety class
Class I