52
Summit Arts Design Production LTD
Size: A5
GB
CLEANING AND MAINTENANCE
Cleaning
Before cleaning and maintaining the product, disconnect the power plug from the
wall outlet.
• Remove all items from the cooler.
• Wipe the inside and outside surfaces using a damp cloth.
Tip:
Acid substances can corrode the plastic parts of the cooler. Do not allow this type of
substance (e.g. lemon juice, juice from orange peels) to come in contact with the cooler.
•
After cleaning, wipe all parts thoroughly and allow them to dry.
• Do not use abrasive sponges or cleaning agents, steel wool, or metallic utensils to clean the
interior or exterior of the appliance.
• To save energy, clean the compressor (
9
) at the back of the cooler using a brush
or a vacuum cleaner once a year.
• Regularly check the drain pipe (
8
) at the back panel of the cooler. Clean it whenever
the drain is blocked.
Important!
When the cooler is not in use,
• turn the temperature knob to the
0
position and disconnect the power plug from
the wall outlet.
• remove all items from the inside.
• clean and dry the inside.
• leave the door slightly open to avoid mold to grow.
Defrosting
• This cooler has a built-in automatic defrosting function, which is activated automatically when
the compressor is not running. The temperature knob must be set to the setting (
1
).
Note:
Should the frost layer be more than 3mm thick, the cooler must be switched
off, defrosted, and cleaned.
(IM)601-000229_MAKRO_GPC1088_Booklet-IM_V1_140317.indb 52
14/3/17 7:46 pm
