background image

9 ENGLISH

Press the check button on the battery cartridge to indi-

cate the remaining battery capacity. The indicator lamps 

light up for a few seconds.

Indicator lamps

Remaining 

capacity

Lighted

Off

Blinking

75% to 100%

50% to 75%

25% to 50%

0% to 25%

Charge the 

battery.

The battery 

may have

malfunctioned.

NOTE:

 Depending on the conditions of use and the 

ambient temperature, the indication may differ slightly 

from the actual capacity.

Main power switch

Tap the main power button to turn on the tool.

To turn off the tool, press and hold the main power but

-

ton until the power lamp and speed indicator go off.

2

1

3

►  

1.

 Speed indicator 

2.

 Main power button 

3.

 Power 

lamp

NOTE:

 The tool will automatically turned off if it is left 

without any operations for a certain period of time.

Switch action

WARNING:

 

For your safety, this tool is 

equipped with lock-off lever which prevents the 

tool from unintended starting. NEVER use the tool 

if it runs when you simply pull the switch trigger 

without pressing the lock-off lever. Return the 

tool to our authorized service center for proper 

repairs BEFORE further usage.

WARNING:

 

NEVER tape down or defeat pur-

pose and function of lock-off lever.

CAUTION:

 

Before installing the battery car-

tridge into the tool, always check to see that the 

switch trigger actuates properly and returns to 

the "OFF" position when released.

 Operating a tool 

with a switch that does not actuate properly can lead 

to loss of control and serious personal injury.

CAUTION:

 

Never put your finger on the main 

power button and switch trigger when carrying 

the tool.

 The tool may start unintentionally and cause 

injury.

NOTICE:

 

Do not pull the switch trigger hard with-

out pressing the lock-off lever. This can cause 

switch breakage.

To prevent the switch trigger from being accidentally 

pulled, a lock-off lever is provided. To start the tool, 

depress the lock-off lever and pull the switch trigger. 

The tool speed increases by increasing pressure on the 

switch trigger. Release the switch trigger to stop.

1

2

►  

1.

 Lock-off lever 

2.

 Switch trigger

Summary of Contents for XRU15PT





















Reviews: