6
1
2
009993
Now point suction inlet downwards, turn
capsule in direction of arrow in diagram, and
disconnect capsule slowly and straight.
NOTE:
•
Dust may spill out when capsule is
opened, so be sure to set a garbage
bag beneath capsule.
1
2
009994
Remove accumulated dust from inside of
capsule and off of prefilter.
1
2
009995
Twist prefilter in direction of arrow to
unfasten securing lip from cleaner unit and
then pull off prefilter.
1
2
009996
Clean out fine dust from prefilter. Next,
remove filter, and lightly tap to dislodge dust.
Reassembly
1
009997
Put on filter until it is fully in position on the
cleaner unit.
NOTE:
•
Make sure filter is put on straight
without being peeled back. If filter is put
on incorrectly as shown in diagram,
dust will get into motor housing, and
cause motor failure.
1
010005
Connect prefilter. At this time, make sure to
twist prefilter so that securing lip is firmly
locked into cleaner unit.
1
009999
1. Filter
1. Prefilter
1. Filter
1. Prefilter
2. Filter
1. Prefilter
2. Securing lip
1. Prefilter
2. Capsule
1. Capsule
2. Suction inlet
