Makita XCU03, Instruction Manual

Page: 17 / 84

17 ENGLISH
1 2
Ź 1. Locking ring 2. Sprocket
NOTICE:
Make sure that the sprocket is installed
DVVKRZQLQWKH¿JXUH
Storing the tool
1. Clean the tool before storing. Remove any chips
and sawdust from the tool after removing the sprocket
cover.
2. After cleaning the tool, run it under no load to lubri-
cate the saw chain and guide bar.
3. Cover the guide bar with the guide bar cover.
4. (PSW\WKHRLOWDQN
Instructions for periodic maintenance
To ensure long life, prevent damage and ensure the full functioning of the safety features, the following maintenance
PXVWEHSHUIRUPHGUHJXODUO\:DUUDQW\FODLPVFDQEHUHFRJQL]HGRQO\LIWKLVZRUNLVSHUIRUPHGUHJXODUO\DQGSURS -
erly. Failure to perform the prescribed maintenance work can lead to accidents! The user of the chain saw must not
perform maintenance work which is not described in the instruction manual. All such work must be carried out by our
authorized service center.
Check item / Operating time Before
operation
Everyday Every week Every 3
month
Annually Before
storage
Chain saw Inspection. - - - - -
Cleaning. - - - - -
Check at
authorized
service center. - - - -
Saw chain Inspection. - - - - -
Sharpening if
necessary. - - - - -
Guide bar Inspection. - - - -
Remove from
the chain saw. - - - - -
Chain brake Check the
function. - - - - -
Have it
inspected
regularly at
authorized
service center. - - - - -
Chain
lubrication Check the oil
feed rate. - - - - -
Switch trigger Inspection. - - - - -
Lock-off lever Inspection. - - - - -
Oil tank cap Check
tightness. - - - - -
Chain catcher Inspection. - - - - -
Screws and
nuts Inspection. - - - - -
7RPDLQWDLQSURGXFW6$)(7<DQG5(/,$%,/,7<
UHSDLUVDQ\RWKHUPDLQWHQDQFHRUDGMXVWPHQWVKRXOG
be performed by Makita Authorized or Factory Service
Centers, always using Makita replacement parts.