8
1
013487
Remove the cap from the mounting port. You can place the
cap in multi hook while the hose is connected to the tool.
013379
Insert the hose onto the mounting port of the tank and
turn it clockwise until it locks.
OPERATION
WARNING:
•
Always use a P2-respirator.
CAUTION:
•
If foam or liquid escapes from the tool, switch off
immediately. Continuing to using in this condition may
cause an electric shock and breakage of the cleaner.
MAINTENANCE
WARNING:
•
Always use a P2-respirator during performing
maintenance.
•
Never reuse the air filter after removal of the machine.
CAUTION:
•
Always be sure that the tool is switched off and
unplugged before attempting to perform inspection
or maintenance.
•
Never use gasoline, benzine, thinner, alcohol or the
like. Discoloration, deformation or cracks may result.
•
Please check with your local authorities for any
regulations regarding the use of these vacuum cleaners
when working with toxic materials such as Asbestos.
•
Before any repair or maintenance always check what
materials the vacuum cleaner has been working with.
If in doubt, always have professionally cleaned by
licensed asbestos / toxic cleaning company before
conducting any repair or maintenance.
•
A technical inspection, including inspection of
filters, air tightness, and control mechanism, must
be performed by an instructed person at least
once a year, or more frequently as may be
specified by national requirements.
•
During maintenance, all contaminated items which
cannot be satisfactorily cleaned must be disposed.
Such items must be disposed of in impervious
hags which accord with your country's regulations.
•
After the operation in the hazardous area, the
outside of the tool must be decontaminated by
vacuum cleaning methods and wiped clean or
treated with sealant before you take the tool out of
a hazardous area. All the parts of the tool must be
regarded as contaminated when removed from the
hazardous area, and appropriate action must be
taken to prevent dust dispersal.
•
Change the air filter when the air filter is clogged
with dust or you feel that the cleaner's
performance declined.
•
Check the filters periodically. If there is a tear on it,
replace it immediately.
Removing the air filter
CAUTION:
•
Wait for about 5 minutes so that dust in the tank
completely settles down.
•
Make sure that the tool is unplugged.
•
Be careful not to let the dust enter inside the tank
cover when removing the air filter.
1
013389
Unhook the tank cover and remove it carefully. Put it up
side down.
1
013390
Remove the screw on the stopper lever.
Unlock the filter hooks by flipping the stopper lever.
1. Stopper lever
1. Stopper lever
1. Cap
