2
ENGLISH (Original instructions)
SPECIFICATIONS
Model VC3211H
Countries EU
Switzerland
UK
Voltage Volt
230-240
230-240
110
230-240
Power
consumption
Watt
1050 1050 1050 1050
Watt at
symbol mode
2400
1100
600
1900
Connected load for appliance
socket
Watt at
symbol
mode
2600 1400 850 2100
Total connected load
Watt
3450
2150
1650
2950
Model VC3211H
With
φ
28 mm X 3.5 m hose
2.0 m
3
/min
Volume flow (air)
With
φ
38 mm X 2.5 m hose
3.5 m
3
/min
Vacuum 22
kPa
Type of protection
IP X4 (splash-proof)
Dust 32
L
Recoverable capacity
Water 27
L
Dimensions (L x W x H)
552 mm x 398 mm x 685 mm
Net weight
17.0 kg
Safety class
Class I
• Due to our continuing program of research and development, the specifications herein are subject to change without notice.
• Specifications may differ from country to country.
• Weight according to EPTA-Procedure 01/2003
END114-2
Symbols
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
･
Read instruction manual.
･
Take particular care and attention.
･
Warning! The cleaner may contain
hazardous dust.
･
Never stand on the cleaner.
･
The cleaners are capable of picking up
dust class L,M and H. Follow your
county's regulations relating to dusts
and to occupational health and safety.
Warning! This machine contains dust
hazardous to health. Emptying and
maintenance operations, including
removal of the dust collection means,
must only be carried out by authorised
personnel wearing suitable personal
protection. Do not operate without the
full filtration system fitted.
･
Only for EU countries
Do not dispose of electric equipment
together with household waste material!
In observance of the European
Directive, on Waste Electric and
Electronic Equipment and its
implementation in accordance with
national law, electric equipment that
have reached the end of their life must
be collected separately and returned to
an environmentally compatible
recycling facility.
ENE084-1
Intended use
The tool is intended for collecting both wet and dry dust.
The tool is suitable for commercial use, for example in
hotels, schools, hospitals, factories, shops, offices and
rental businesses.
ENF001-1
Power supply
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and can
only be operated on single-phase AC supply. This tool
should be grounded while in use to protect the operator
from electric shock. Use only three-wire extension cords
which have three-prong grounding-type plugs and three-
pole receptacles which accept the tool's plug.
