background image

9 ENGLISH

2.

  Change the fixed position of the grass receiver by 

moving it in the direction of the arrow.

NOTE:

 The shearing height value is a guideline. The 

actual shearing height may vary depending on the 

condition of the lawn or the ground.

NOTE:

 Try a test shearing in a less conspicuous 

place to get your desired height.

ASSEMBLY

CAUTION:

 

Always be sure that the tool is 

switched off and the battery cartridge is removed 

before carrying out any work on the tool.

CAUTION:

 

When replacing the shear blades, 

always wear gloves and attach the blade cover so 

that your hands and face do not directly contact 

the blades.

NOTICE:

 

When replacing the shear blades, do 

not wipe off grease from the gear and crank.

Installing or removing the blade 

cover

CAUTION:

 

Be careful not to touch the blades 

when installing or removing the blade cover.

To remove the blade cover, pull it slightly, and then slide 

it sideways. To install the blade cover, perform the steps 

in reverse.

Installing or removing the grass 

receiver

CAUTION:

 

When installing or removing the 

grass receiver, be sure to attach the blade cover 

and be careful not to trap your fingers between 

the tool and grass receiver.

Removing the grass receiver
1.

  Release the protrusions on the grass receiver 

from the grooves on the tool while sliding the grass 

receiver toward the front of the tool.

1

►    

1.

 Grass receiver

2.

  Release the hinge of the grass receiver from the 

tool.

Installing the grass receiver
1.

  Hook the hinge of the grass receiver on the groove 

of the tool.

Summary of Contents for UM600DWAE




















Reviews: